Stradalli Original Full Carbon Fiber Bicycle Cycling Bike Handlebar Bar Stem Red Graphic

Stradalli Original Full Carbon Fiber Bicycle Cycling Bike Handlebar Bar Stem Red Graphic


 100% 3K Carbon Fiber


Weight 135 g


The strongest stem on the market today.
High-modulas carbon that has a tensile strength of 50 tons per square cm, and an exterior weave of 3000 weaves per crossing (3K).

Reinforced with race grade titanium bolts.
31.8mm handlebar clamp diameter.
1-1/8" steere tube clamp diameter. 

Comparable to Zipp Speed Weaponry Stem SL145 (sold for $220)

Our quality is world class, competition rated.

Our prices leave Zipp in the dust.


Stradalli cycle Carbon Fiber Handlebar and stem Installation Instructions

A. Please Make sure there are no sharp burrs are present on the 1-1/8 ” (Ø28.6) steer tube
Carefully file or sand to remove if necessary.  

B. Loosen the two Stem Bolts. Slide the Bar / Stem onto the steerer tube until contact with the headset or spacers is made. 
Do not appy grease onto a carbon steerer tube. Only Carbon Assembly Paste is acceptable.

C. Install the headset top cap and compression bolt. Adjust the headset preload per the headset manufacture’s instructions.
 
D. Apply a light layer of grease onto the Stem Bolt threads. Align the stem with the front wheel. Gradually tighten the Stem Bolts, alternating between the two Stem Bolts until 60 kgf.cm / 6 Nm / 52 in.lbs max is
achieved.
Product ID: 1881
SKU: stem_red

Availability: In stock

$88.99

* Required Fields

  • Details
    Details

    Stradalli Original Full Carbon Fiber Bicycle Cycling Bike Handlebar Bar Stem Red Graphic

     100% 3K Carbon Fiber

    Weight 135 g

    The strongest stem on the market today.
    High-modulas carbon that has a tensile strength of 50 tons per square cm, and an exterior weave of 3000 weaves per crossing (3K).
    Reinforced with race grade titanium bolts.
    31.8mm handlebar clamp diameter.
    1-1/8" steere tube clamp diameter. 
    Comparable to Zipp Speed Weaponry Stem SL145 (sold for $220)
    Our quality is world class, competition rated.
    Our prices leave Zipp in the dust.
    Stradalli cycle Carbon Fiber Handlebar and stem Installation Instructions

    A. Please Make sure there are no sharp burrs are present on the 1-1/8 ” (Ø28.6) steer tube
    Carefully file or sand to remove if necessary.  

    B. Loosen the two Stem Bolts. Slide the Bar / Stem onto the steerer tube until contact with the headset or spacers is made. 
    Do not appy grease onto a carbon steerer tube. Only Carbon Assembly Paste is acceptable.

    C. Install the headset top cap and compression bolt. Adjust the headset preload per the headset manufacture’s instructions.
     
    D. Apply a light layer of grease onto the Stem Bolt threads. Align the stem with the front wheel. Gradually tighten the Stem Bolts, alternating between the two Stem Bolts until 60 kgf.cm / 6 Nm / 52 in.lbs max is
    achieved.
    Reviews
    Write Your Own Review
    You're reviewing: Stradalli Original Full Carbon Fiber Bicycle Cycling Bike Handlebar Bar Stem Red Graphic
    Tags
    Tags

    Use spaces to separate tags. Use single quotes (') for phrases.

    Custom Configuration

    If you do not see the configuration you like.

    We will custom build your bike with the components you want!

    Call us: 954.283.8585