Sale

Stradalli Cycle Full Carbon Fiber Ergonomic Drop Ergo Road Bike Bicycle Handlebar Drop Bar W-17 White 40 42 44 cm

Stradalli Cycle Full Carbon Fiber Ergonomic Drop Ergo Road Bike Bicycle Handlebar Drop Bar W-17 White 40 42 44 cm


100% 3K Carbon Fiber.


Handlebars for 31.8mm stem
Drop/Reach 145mm/90mm
Reinforced and textured clamping area for secure mounting
Textured handles for sturdy tape application.


The W-17 Ergo Drop is the perfect bar for every ride.  The flat shaped bar top offers an incredibly comfortable ride, while the ergonomic drops are perfect for those high speeds and technical descents. 


Our quality is world class, competition rated.


 Stradalli cycle carbon fiber Handlebar Installation Instructions


A. Measure the stem clamp diameter. The Stradalli cycle carbon fiber handlebar is only compatible with stems that have a 31.8mm clamp diameter.     


Remove all sharp edges and burrs on the stem clamp area. Failure to do so may result damage to the handlebar that can cause failure, loss of control of bicycle, injury or death.   


B. Apply Carbon fiber Installation Compound on stem and faceplate surfaces that contact the handlebar. 


C. Place the handlebar into the Stem Body and install the Face Plate, lightly tightening the Face Plate Bolts but do not tighten. 


Center and adjust the position of the handlebar. Stradalli cycle carbon fiber road handlebars are designed to be set up with the ends of the bars approximately horizontal (0° - 6°). This will give the best position for riding in the drops and short reach to the brake lever.   


D. Tighten stem face plate bolts according to stem manufacturer’s instructions.   


Tighten faceplate bolts only a ¼ turn at a time, alternating between the bolts in an “ X ” pattern. Failure to do so will result in damage to the handlebar that is not covered under warranty. 


Tighten the bolts to the Minimum amount of torque necessary to secure the handlebar. 


Do NOT exceed 60kgf.cm of torque. 60 kgf.cm / 6 Nm / 52 in.lbs, is the maximum torque for most M5 stem bolts. 


Failure to comply with these instructions 


may result in damage to the bar causing loss of control of bicycle, injury, or death.

Product ID: 2049
SKU: handlebars_w-17_ergo_drop_

Availability: In stock

Regular Price: $99.99

Special Price $89.99

* Required Fields

  • Details
    Details

    Stradalli Cycle Full Carbon Fiber Ergonomic Drop Ergo Road Bike Bicycle Handlebar Drop Bar W-17 White 40 42 44 cm

    100% 3K Carbon Fiber.

    Handlebars for 31.8mm stem
    Drop/Reach 145mm/90mm
    Reinforced and textured clamping area for secure mounting
    Textured handles for sturdy tape application.

    The W-17 Ergo Drop is the perfect bar for every ride.  The flat shaped bar top offers an incredibly comfortable ride, while the ergonomic drops are perfect for those high speeds and technical descents. 

    Our quality is world class, competition rated.

     Stradalli cycle carbon fiber Handlebar Installation Instructions

    A. Measure the stem clamp diameter. The Stradalli cycle carbon fiber handlebar is only compatible with stems that have a 31.8mm clamp diameter.     

    Remove all sharp edges and burrs on the stem clamp area. Failure to do so may result damage to the handlebar that can cause failure, loss of control of bicycle, injury or death.   

    B. Apply Carbon fiber Installation Compound on stem and faceplate surfaces that contact the handlebar. 

    C. Place the handlebar into the Stem Body and install the Face Plate, lightly tightening the Face Plate Bolts but do not tighten. 

    Center and adjust the position of the handlebar. Stradalli cycle carbon fiber road handlebars are designed to be set up with the ends of the bars approximately horizontal (0° - 6°). This will give the best position for riding in the drops and short reach to the brake lever.   

    D. Tighten stem face plate bolts according to stem manufacturer’s instructions.   

    Tighten faceplate bolts only a ¼ turn at a time, alternating between the bolts in an “ X ” pattern. Failure to do so will result in damage to the handlebar that is not covered under warranty. 

    Tighten the bolts to the Minimum amount of torque necessary to secure the handlebar. 

    Do NOT exceed 60kgf.cm of torque. 60 kgf.cm / 6 Nm / 52 in.lbs, is the maximum torque for most M5 stem bolts. 

    Failure to comply with these instructions may result in damage to the bar causing loss of control of bicycle, injury, or death.

    Reviews
    Write Your Own Review
    You're reviewing: Stradalli Cycle Full Carbon Fiber Ergonomic Drop Ergo Road Bike Bicycle Handlebar Drop Bar W-17 White 40 42 44 cm
    Tags
    Tags

    Use spaces to separate tags. Use single quotes (') for phrases.

    Custom Configuration

    If you do not see the configuration you like.

    We will custom build your bike with the components you want!

    Call us: 954.283.8585