LOOK KÉO 2 MAX Road Bike Pedals White

KÉO 2 MAX
MAXIMUM POWER FOR MAXIMUM RELIABILITY

White

  • Improved cleat support-contact
  • Lightweight
  • Tested and built to last
  • New 12% larger stainless steel platform area for cleat support and improved power transmission
  • Oversized axle, three bearing double-sealed bearing axle.

Technical Data

  • USE
  • ROAD - FROM LEISURE TO COMPETITION
  • BODY
  • COMPOSITE
  • AXLE
  • STEEL
  • THREAD
  • 9/16 X 20 MM
  • ROLLER BEARING
  • 2 ROLLER BEARINGS, 1 NEEDLE BEARING
  • HEIGHT AXLE / SOLE
  • 15,7 MM
  • AXLE DISTANCE PEDAL / CRANK
  • 53 MM
  • MULTITENSOR
  • YES- ADJUSTABLE FROM 9 TO 15 NM
  • CLEATS
  • GREY KEO GRIP CLEATS
  • ANGULAR FREEDOM
  • 0°, 4.5° OR 9° ACCORDING TO TYPE OF CLEAT (BLACK, GREY OR RED)
  • PEDAL WEIGHT
  • 130 G PER PEDAL. (328 G PER PAIR WITH CLEATS AND HARDWARE)
  • COLOURS
  • WHITE BODY / BLACK LEVER 
  • ACCESSORIES
  • ONE PAIR GREY KEO GRIP CLEATS + HARDWARE (6 SCREWS 5 X 11 MM AND 6 WASHERS)
  • WARRANTY
  • 2 YEARS



Technology

• LARGE AND RESISTANT CLEAT CONTACT AREA

For a more efficient and more comfortable pedal stroke, the Kéo 2 MAX has a cleat contact surface area 12% larger than the Kéo Carbon. To further improve the transfer of power and to longevity of the pedal, this surface area is made of stainless steel molded directly into the pedal body.

keo2max_2_1_1

• Large pressing area

 

• LIGHTWEIGHT : 130G

With its 130g weight Keo 2 Max is one of the lightest pedals in its category.
This is possible thanks to the use of injected carbon and composite materials, which reduce weight while maintains durability.

keo2max_1_1_1

• Keo 2 Max before mounting the axis

 

• RELIABILITY

Particular attention was focused on reliability and provided through features such as: a carbon injected pedal body, a stainless steel cleat contact area, an oversized axle with dual seals, making this a pedal built to last.
The new line of Kéo 2 MAX pedals maintains a low cleat contact height even with the use of a steel oversize axle. The pedal is built with two miniature ball bearings (12mm inner x 18mm outer diameters) and a needle roller bearing. LOOK axles are only approved once they have survived a million cycles at 100 revolutions per minute with a 90kg (198lbs) load at the center of the pedal and an eccentric rotation (replicating a bump each revolution). This test largely surpasses current standards (reference NF EN 14781).
Dual seals increase bearing longevity.

keo2max_3_1_1

• stainless Cromoly axis

 

• ADJUSTABLE Q-FACTOR

Thanks to 14mm of threads on the new LOOK axle, the Q-factor may be extended by 2mm with the use of specific washers available separately.
Use of these specific washers results in a Q-factor of 55mm versus the original 53mm

Product ID: 1001
SKU: look_pedals_keo_2_max_white

Availability: In stock

$190.00
  • Details
    Details

    KÉO 2 MAX
    MAXIMUM POWER FOR MAXIMUM RELIABILITY

    White

    • Improved cleat support-contact
    • Lightweight
    • Tested and built to last
    • New 12% larger stainless steel platform area for cleat support and improved power transmission
    • Oversized axle, three bearing double-sealed bearing axle.

    Technical Data

    • USE
    • ROAD - FROM LEISURE TO COMPETITION
    • BODY
    • COMPOSITE
    • AXLE
    • STEEL
    • THREAD
    • 9/16 X 20 MM
    • ROLLER BEARING
    • 2 ROLLER BEARINGS, 1 NEEDLE BEARING
    • HEIGHT AXLE / SOLE
    • 15,7 MM
    • AXLE DISTANCE PEDAL / CRANK
    • 53 MM
    • MULTITENSOR
    • YES- ADJUSTABLE FROM 9 TO 15 NM
    • CLEATS
    • GREY KEO GRIP CLEATS
    • ANGULAR FREEDOM
    • 0°, 4.5° OR 9° ACCORDING TO TYPE OF CLEAT (BLACK, GREY OR RED)
    • PEDAL WEIGHT
    • 130 G PER PEDAL. (328 G PER PAIR WITH CLEATS AND HARDWARE)
    • COLOURS
    • WHITE BODY / BLACK LEVER 
    • ACCESSORIES
    • ONE PAIR GREY KEO GRIP CLEATS + HARDWARE (6 SCREWS 5 X 11 MM AND 6 WASHERS)
    • WARRANTY
    • 2 YEARS



    Technology

    • LARGE AND RESISTANT CLEAT CONTACT AREA

    For a more efficient and more comfortable pedal stroke, the Kéo 2 MAX has a cleat contact surface area 12% larger than the Kéo Carbon. To further improve the transfer of power and to longevity of the pedal, this surface area is made of stainless steel molded directly into the pedal body.

    keo2max_2_1_1

    • Large pressing area

     

    • LIGHTWEIGHT : 130G

    With its 130g weight Keo 2 Max is one of the lightest pedals in its category.
    This is possible thanks to the use of injected carbon and composite materials, which reduce weight while maintains durability.

    keo2max_1_1_1

    • Keo 2 Max before mounting the axis

     

    • RELIABILITY

    Particular attention was focused on reliability and provided through features such as: a carbon injected pedal body, a stainless steel cleat contact area, an oversized axle with dual seals, making this a pedal built to last.
    The new line of Kéo 2 MAX pedals maintains a low cleat contact height even with the use of a steel oversize axle. The pedal is built with two miniature ball bearings (12mm inner x 18mm outer diameters) and a needle roller bearing. LOOK axles are only approved once they have survived a million cycles at 100 revolutions per minute with a 90kg (198lbs) load at the center of the pedal and an eccentric rotation (replicating a bump each revolution). This test largely surpasses current standards (reference NF EN 14781).
    Dual seals increase bearing longevity.

    keo2max_3_1_1

    • stainless Cromoly axis

     

    • ADJUSTABLE Q-FACTOR

    Thanks to 14mm of threads on the new LOOK axle, the Q-factor may be extended by 2mm with the use of specific washers available separately.
    Use of these specific washers results in a Q-factor of 55mm versus the original 53mm

    Reviews
    Write Your Own Review
    You're reviewing: LOOK KÉO 2 MAX Road Bike Pedals White
    Tags
    Tags

    Use spaces to separate tags. Use single quotes (') for phrases.

    Custom Configuration

    If you do not see the configuration you like.

    We will custom build your bike with the components you want!

    Call us: 954.283.8585